Neotech-communications FSW-41HP Manual de usuario descargar pdf (Pagina 3)

FSW-41HP

Unmanaged Industrial 4-port 10/100Base-TX + 1-port 100Base-FX SFP Ethernet Switch with PoE+

3 V1

Operational Instructions

Indicators

Indicator Color Status Description

PWR Green

ON Powered on

SFP LINK Green

ON Fiber link up

Blinking The fiber link is receiving or transmitting data

OFF Fiber is not connected or fiber link down

PoE (1-4) Green

ON PoE is activated.

Blinking A Power Device (PD) is being detected.

OFF No device is connected or the connected device is not

a PD.

RJ45

Port

(P1-P4)

LINK/ACT Green

ON A network device is connected

Blinking The connected device is transmitting or receiving data.

OFF No network device is connected

SPD

Orang

ON 100Base-TX

OFF 10Base-TX mode

Ports

P1-P4 Ethernet ports

SFP Fiber port

Power Input DC 48V input

Functional Description

• Supports IEEE802.3at Power over Ethernet (POE+)

• 1 SFP (mini-GBIC) supports 10/100Base-FX speed

• Support Auto-Negotiation and Auto-MDI/MDI-X

• Support Store-and-Forward Transmission

• Support Wall-mount installation

• -10℃ to 60℃ (14℉ to 140℉) operating temperature

Assembly, Startup, and Dismantling

Wall Mounting Installation

• Assembly: Mount the standalone unit onto a fixture, e.g. a plank, (either on the wall or on a flat

surface) with at least 2 screws piercing through the holes on the mounting frame to secure it in

position.

• Startup: Connect the supply voltage to start up the Switch via the terminal block.

• Dismantling: Locate and remove the securing screws. Usually, but not limited to, at least 2 screws.

Manual Earth Green manual is available on our website. www.neotechcomm.com.tw

1 2 3

1
FSW-41HP 1

Comentarios a estos manuales

Sin comentarios

Neotech-communications FSW-41HP Manual de usuario Pagina 3

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Neotech-communications FSW-41HP