Neotech-communications HGSW-42SHP Manual de usuario descargar pdf (Pagina 4)

HGSW-42SHP

Self-Configured Hardened 4-port 10/100/1000Base-T + 2-port 1000Base-X SFP Ethernet Switch with PoE+/PSE

4 V1.0

Setup

1. Connect one end of the Ethernet cables to their corresponding ports on the product. Connect the

other end to the network equipment such as IP cameras, Switches or PCs. Insert the SFP and

connect the optical fiber cables to its connectors.

2. Connect the product with the power adapter and switch on the product, the PWR indicator should

then be ON. If it is not, please check whether the power cable is connected properly and the power

supply functions normally.

After all cables are connected, corresponding indicators will be on. Please refer to the Operational

Instructions for detail descriptions.

Interface

RJ-45 Pin Assignment

Pin Signal Name

TP0+

TP0-

TP1+

TP2+

TP2-

TP1-

TP3+

TP3-

Power and Alarm Connection：

Description

V1 - V1 + ALM V2 - V2 +

Power Input

GND

+48V

(DC)

Normal Open GND

+48V

(DC)

Cable Connections

Signal Type Cable Type Connector

Ethernet

Cat. 5 or above RJ45

Optical

SM/MM Optical fiber cable (depends on SFP) LC

Power supply 1

Power cable

6-pin Terminal Block（Pin 1/2）

Power supply 2

Power cable

6-pin Terminal Block（Pin 5/6）

ALM

2 wire

6-pin Terminal Block（Pin 3/4）

1 2 3 4 5 6

Comentarios a estos manuales

Sin comentarios

Neotech-communications HGSW-42SHP Manual de usuario Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Neotech-communications HGSW-42SHP